Vista VIP Kit2 VK2-ENCODER Manuel d'utilisateur télécharger pdf (Page 14)

4. The encoder‟s Live View page appears in your browser.

3.2. Access from the internet

Access from the internet Once connected, the VK2-540VRD is accessible on your local

network (LAN). To access the VK2-540VRD from the Internet you must configure your

broadband router to allow incoming data traffic to it. To do this, enable the NAT-traversal

feature, which will attempt to automatically configure the router to allow access to the VK2-

540VRD. This is enabled from Setup > System > Network > NAT.

For more information, please see NAT traversal (port mapping) for IPv4, on page 60.

3.3 Setting the admin password over a secure connection

To gain access to the product, the password for

the default administrator user must be set. This

is done in the “Admin Password” dialog, which is

displayed when the VK2-540VRD is accessed for

the setup at the first time. Enter your admin

name and password, set by the administrator.

Note: The default administrator username and

password is “admin”. If the password is lost, the

VK2-540VRD must be reset to the factory default

settings. See “3.9 Resetting to the factory default

settings”.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 71 72

Pas de commentaire

Vista VIP Kit2 VK2-ENCODER Manuel d'utilisateur Page 14