Vista VIP Kit2 VK2-ENCODER Manuel d'utilisateur télécharger pdf (Page 10)

3. Extract each wire through the cable hole, connect BNC cable and communication lines.

4. Unlock torx screws (4x) the dome cover and fix the dome case f irmly with supplied

mounting screws (4x), plastic anchors (4x), O-Rings (4x).

5. Adjust desired focus and scene by turning and moving the hemisphere by hand.

6. Lock the housing cover with torx screws (4x).

• Cable through the electrical box with the dome base

The housing can also be mounted on a 4s or 2s electrical box.

• Using the conduit knockout punched with the dome base

Remove the conduit knockout punched for the cable entry.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 71 72

Pas de commentaire

Vista VIP Kit2 VK2-ENCODER Manuel d'utilisateur Page 10