Vista VIP Kit2 VK2-ENCODER Manuel d'utilisateur télécharger pdf (Page 14)

2.2 Connection

• Connecting to the RJ-45

Connect a standard RJ-45 cable to the network port of the network dome camera. Generally a

cross-over cable is used for directly connection to PC, while a direct cable is used for connection

to a hub.

• Connecting Alarms

AI(Alarm In) :

You can use external devices to signal the dome camera to react on events. Mechanical or

electrical switches can be wired to the AI (Alarm In) and G (Ground) connectors.

G(Ground) :

Connect the ground side of the alarm input and/or alarm output to the G (Ground) connector.

AO(Alarm Out) :

The dome camera can activate external devices such as buzzers or lights. Connect the device to

the AO (Alarm Out) and G (Ground) connectors.

• Connecting the Power

Connect the power of DC12V 0.35A for the dome camera. Connect the positive(+) pole to the ‘+’

position and the negative(-) pole to the ‘-‘ position.

Use certified / Listed Class 2 power source only.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

Pas de commentaire

Vista VIP Kit2 VK2-ENCODER Manuel d'utilisateur Page 14