Vista VIP Kit2 VK2-ENCODER Manuel d'utilisateur télécharger pdf (Page 68)

VK2-2MPBX User manual V1.2

Procedures to make an audio file in G.711 format for Audio Alert.

1. Connect the microphone in your PC.

2. Click the Capture button and talk to the microphone to record the audio or voice.

You can record up to 30 seconds. Click the Stop button to stop on capturing.

3. Click the Save button and then set the file name to save a current capture file with PCM format.

If you don’t need to make any PCM file, skip this step and then go to the step 5 directly.

4. Click the Open button and then select the file name to open an audio file in PCM format.

5. Click the Encode button to encode a current audio file to G.711 format for Audio Alert.

Set the file name and encode parameters.

Figure 38. Event / Event Out – Audio Alert / Encode Setup

NOTE

All parameters must be synchronized with ones in audio setting page of network devices for a

proper operation.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 103 104

Pas de commentaire

Vista VIP Kit2 VK2-ENCODER Manuel d'utilisateur Page 68