Vista Quantum QX960H16-series Spécifications télécharger pdf (Page 32)

General Information

The VISTA-1 O can be remotelv woarammed from an IBM comDatibie Personal

Note:

Computer (PC), a Hayes Modern,”and Ademco’s V-LINK@ Softwa}e (see below). _

Downloading

Programming the control from a remote location is protected against compromise —

by someone attempting to defeat the system, by using multi-levels of security

is not permissible

protection:

for UL insta//ations. ,

Equipment Required At

Security Code Handshake: An 8-digit download ID code must be

matched between the control and the downloading software.

Site Initiated Remote Programming: The installer or subscriber initi-

ates the callback from the subscriber premises (by pressing MASTER CODE

+ # + 1) while disarmed. All parameters can then be downloaded via the

phone lines using a personal computer.

Station Initiated Remote Programming: The operator calls the site

from your office to initiate the download call. The control hangs up and then

calls back the PC via the preprogrammed telephone number. The unit can

then be uploaded, downloaded, or controlled from your office .

Data Encryption: Data passed between the PC and the control is en-

crypted for security so that it is very difficult for a foreign device tapped into

the phone line to take over communication and substitute system compromis-

ing information.

the premises:

. VISTA-1 O and console.

At the installer’s office/home:

● An IBM PC compatible computer.

. Either.- A Hayes brand Smartmodem 1200 [Level 1.2 or higher external

or Level 1.1 or higher (with 4 position DIP switch) internal style],

or: A Hayes brand Optima

24 Plus FAX96 Modem (set Aux Modem

Command to: XL?D2AC18KJO).

. A V-Link Downloading Software Diskette (Rev. 3.0, or higher).

. Appropriate interconnecting cables.

Programming

The downloading system can perform many functions when in communication

with the control unit. Besides uploading and downloading, the status of the sys-

tem can be observed and various commands can be initiated, as follows:

●

Arm the System in the Away Mode; Disarm the System.

Bypass a Zone.

Force the System to Accept a New Program Download.

Shut Down Communication (dialer) Functions (non-payment of monitoring

fees in an owned system).

Shut

Down all Security System Functions (non-payment for a leased system).

Inhibit Local Keypad Programming (prevents account takeover).

Command the System to Upload a Copy of its Resident Program to the office.

Read: Arminq Status, AC Power Status, Lists of Faulted Zones, Bv~assed

Zones, Zone; Currently in Alarm, Zones Currently in Trouble, and RF “Sensors

with Low Battery Conditions.

Notes: After the control and the PC have established valid communication. each

Remote Programming .

Advisory Notes

console on the system will become inactive and will display “CC” or *’MODEM

COMM.”. The control, however, will still be scanning its zones and looking for

alarms. If an alarm does occur, after communication is broken off, alarms are

sounded and the proper dialer reports are sent to the central station. The con-

soles will become active after the download communication is terminated. The

detailed operation of the download functions is covered in the installation in-

structions for the V-Link Downloading Software Diskette.

Alarm and trouble reporting may be delayed during the time that the system

and the Downloading Software are linked to each other following a valid -

exchange of codes, but the proper message will get through to the Central

Station after the link is broken.

(continued)

–32–

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Vista Quantum QX960H16-series Spécifications Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Enregistreurs vidéo numériques (DVR) Vista Quantum QX960H16-series