Vista MiniD400 Manuel d'utilisateur télécharger pdf (Page 19)

5. EVENT SETUP

5.1 ALARM SETUP

5.1.1 ALARM INPUT (ON / OFF): Select ‘ON’ if you want to use alarm input device.

5.1.2 INPUT TYPE: Select alarm input type between ‘Normally Open’ and ‘Normally Close’

NC: NORMAL CLOSE

NO: NORMAL OPEN

5.1.3 ALARM OUTPUT:

ALARM INPUT ALARM OUTPUT

Normally Open Normally Open

larm input type is Normal Open.

The device connected to alarm output is in ‘OFF ‘status

and turns ON when events occur.

Normally Open Normally Closed

larm input type is Normal Open.

The device connected to alarm output is in ‘ON ‘status

and turns OFF when events occur.

Normally Closed Normally Open

larm input type is Normal Close.

The device connected to alarm output is in ‘OFF ‘status

and turns ON when events occur.

Normally Closed Normally Closed

larm input type is Normal Close.

The device connected to alarm output is in ‘ON ‘status

and turns OFF when events occur.

Note: In ‘Normal Close’ mode, if an intruder cuts the cable that connects the sensor to the MiniD400, the unit will

start to record automatically. In ‘Normal Open’ mode, if an intruder cuts the cable that connects the sensor to

the MiniD400, the unit will not start to record.

N.O.

1. OFF

LOW

2. OFF

3. OFF

4. OFF

IME

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Pas de commentaire

Vista MiniD400 Manuel d'utilisateur Page 19